Endüstriyel Kaldırma SistemleriMühendislik, üretim ve servis tek teknik merkezde
Industrial crane engineering across Türkiye and international marketsEngineering, manufacturing, installation, commissioning, maintenance and modernizationOverhead, gantry, monorail, jib, hoist and process lifting systemsTechnical service, fault diagnostics, planned maintenance and spare-parts support
Standards and Safety

Technical framework from classification to safe use

Standards are not merely a list of documents. They connect design inputs, inspection scope, maintenance discipline and operational responsibility through a common technical language.

Crane standards and safety
ISO 4301-1

Crane classification

Classification considers total working cycles and load-spectrum conditions. It supports consistent selection of structures and mechanisms.

ISO 12480-1

Safe use and management

Planning, responsibilities, operational control and safe-use principles are addressed throughout lifting operations.

ISO 9927-1 / 9927-5

Inspection framework

General crane inspections and specific guidance for bridge and gantry cranes support systematic condition assessment.

ISO 2408

Steel wire ropes

Requirements for steel wire rope construction and characteristics support correct selection and traceability.

EN 14492-2

Power-driven hoists

Safety requirements for power-driven winches and hoists inform equipment-level design and verification.

Applicable local rules

Legal and workplace obligations

Statutory periodic inspection must be performed by authorized competent persons under the applicable law; maintenance records do not replace statutory inspection.

Field Inspection Discipline

Records, measurements and functional tests work together

Maintenance, condition checks, statutory periodic inspection and engineering assessment are different activities. Scope, authority and records must remain clearly separated.

Structure, welds, bolted interfaces and runway alignment
Ropes, chains, drums, sheaves, hooks and load blocks
Brakes, limits, overload protection and emergency stop
Electrical panels, pendant/radio controls and power-supply systems
Travel mechanisms, wheels, buffers, end stops and lubrication
Inspection findings, repair closure, test records and traceability
Official Sources

Standard designation and status are verified at project date

Edition, status and applicability must be verified with the official publisher for the project country, equipment type and contract scope.

Direct Contact with Engineering

Let us review the load, site and objective together

Send a structured request for a new crane, modernization, maintenance, fault or spare parts.